What is the JKM435-460N-54HL4R-(V)?
- Peak power: 435–460 Wp (435/440/445/450/455/460 W variants), 0 ~ +3% tolerance
- Module efficiency: up to 23.02% at 460 W, Pmax temperature coefficient −0.29%/°C
- Dimensions and weight: 1762 × 1134 × 30 mm at just 21.0 kg — far more flexible to lay out than long-format modules
- Mechanical rating: 6000 Pa front / 4000 Pa rear, higher than the larger modules in the same family
- Warranty: 15-year product warranty (longer than the 12 years on larger models), 30-year performance warranty to 87.4%
The JinkoSolar Tiger Neo 54HL4R-(V) is a 108-cell N-type TOPCon module rated up to 460 W, designed specifically for residential roofs. Its advantage is not maximum wattage per panel but how well it fits: at 1762 mm long and just 21 kg, it lays out cleanly on the multi-plane roofs typical of Thai houses, wastes less edge space, is safe for a two-person lift without a crane, and puts less load on the roof structure than long-format modules.
Why a smaller module often suits a house roof better
It is easy to assume higher wattage is always better, and on a large continuous roof it is. But house roofs are usually split into several planes with obstructions — skylights, vent pipes, aircon condensers. A 2.2–2.5 metre module frequently fits in fewer positions than expected, leaving unusable offcuts of roof. A 1.76 metre module lays out far more flexibly, and often delivers more total installed capacity across the same roof. Handling matters too. At 21 kg, two installers can lift a module safely without a crane, unlike the 27–34 kg large-format panels that require extra planning on many residential jobs. This model is also rated to 6000 Pa on the front face — higher than the longer modules in the same family — and carries a 15-year product warranty against the 12 years offered on the larger versions.
Highlights from the datasheet
- 1762 mm format lays out flexibly: fits multi-plane house roofs with less wasted area, often yielding more total capacity than long-format modules
- 21 kg only: safer manual handling, lighter structural load, faster installation
- 6000 Pa front / 4000 Pa rear: mechanically stronger than the long-format modules in the same family
- 23.02% efficiency: high for a residential-format module, giving good output per square metre
- 15-year product warranty: longer than the 12 years on larger Tiger Neo models, alongside the 30-year performance warranty
- −0.29%/°C temperature coefficient: the same heat tolerance as the big modules, since it uses the same N-type TOPCon cells
- 40.17 V Voc per module: more modules per string before hitting the inverter's voltage ceiling — useful design flexibility on residential systems
Key specifications (JKM435-460N-54HL4R-(V))
| Specification | Datasheet value |
|---|---|
| Maximum Power (Pmax) | 435–460 Wp (รุ่นย่อย 435 / 440 / 445 / 450 / 455 / 460 W) ค่าความคลาดเคลื่อนกำลัง 0 ~ +3 % |
| Module Efficiency (STC) | 21.77–23.02 % (รุ่น 460 W = 23.02 %) |
| Cell Type | N-type Mono-crystalline TOPCon (Tunnel Oxide Passivating Contacts) |
| Number of Cells | 108 เซลล์ (54×2 ครึ่งเซลล์) |
| Voltage at Maximum Power (Vmp) | 33.60 V (รุ่น 460 W) |
| Current at Maximum Power (Imp) | 13.69 A (รุ่น 460 W) |
| Open-circuit Voltage (Voc) | 40.17 V (รุ่น 460 W) |
| Short-circuit Current (Isc) | 14.14 A (รุ่น 460 W) |
| Temperature Coefficients | Pmax −0.29 %/°C, Voc −0.25 %/°C, Isc 0.045 %/°C |
| Dimensions (L × W × H) | 1762 × 1134 × 30 mm |
| Weight | 21.0 kg |
| Maximum Static Load (Front / Rear) | ด้านหน้า 6000 Pa / ด้านหลัง 4000 Pa |
| Front Glass & Frame | กระจกนิรภัย 3.2 mm เคลือบกันสะท้อน ส่งผ่านแสงสูง เหล็กต่ำ · เฟรมอะลูมิเนียมอโนไดซ์ |
| Max System Voltage / Fuse / Operating Temperature | 1000/1500 VDC (IEC) · ฟิวส์อนุกรมสูงสุด 25 A · −40 °C ~ +70 °C · กล่องต่อสาย IP68 · Protection Class II · IEC Fire Type C |
| Product Warranty | 15 ปี |
| Linear Power Warranty / Degradation | 30 ปี — เสื่อมปีแรกไม่เกิน 1 % ปีถัดไป 0.40 % ต่อปี คงเหลือ 87.4 % เมื่อสิ้นปีที่ 30 |
Note: every figure above comes straight from the Jinko Solar Co., Ltd. (จดทะเบียนตลาดหลักทรัพย์เซี่ยงไฮ้ STAR Board รหัส 688223) — บริษัทแม่คือ JinkoSolar Holding Co., Ltd. จดทะเบียน NYSE รหัส JKS ตั้งแต่ปี 2010 datasheet. Actual system design (strings per MPPT, cable sizing, breakers) must be calculated for each site.
Why this model suits Phuket
- Phuket house roofs are rarely one plane: mid-size modules use the available area more completely
- Two-storey houses and townhouses: 21 kg means modules go up without crane hire, cutting cost and site time
- Monsoon wind: the 6000 Pa rating gives useful margin on exposed or near-coastal properties
- Salt air and humidity: anodised frame and IP68 junction box suit island conditions; on coastal jobs we add stainless fixings throughout
Who it suits
- Standard houses and townhouses: 3–10 kWp systems, the most common range for Phuket homes
- Roofs split into several small planes: or cluttered with obstructions that defeat long modules
- Roofs with limited load capacity: older buildings or timber structures needing lighter modules
- Sites where modules must be carried by hand: narrow lanes or properties a crane cannot reach
- Owners who value a longer product warranty: 15 years on the module itself plus 30 years on performance
Summary
The Tiger Neo 54HL4R-(V) 460W is the module we specify most often for Phuket homes: 1762 mm and 21 kg lay out well on multi-plane roofs, handling is safe without a crane, the mechanical rating reaches 6000 Pa, and it carries a 15-year product plus 30-year performance warranty. For large factory roofs or continuous decks, the 72HL4-(V) 605W is the better economic choice by reducing panel and clamp counts.
See other models from this brand on the Jinko Solar overview, or browse all the equipment we install.
Download the datasheet (PDF) — full manufacturer specification sheet