What is the JKM580-605N-72HL4-(V)?
- Peak power: 580–605 Wp (580/585/590/595/600/605 W variants), power tolerance 0 ~ +3% — never below the label figure
- Module efficiency: up to 23.42% on the 605 W version — more output from the same roof area
- Cell technology: N-type TOPCon, 144 half-cells (72×2), Pmax temperature coefficient −0.29%/°C
- Dimensions and weight: 2278 × 1134 × 30 mm, 27.0 kg, 5400 Pa front / 2400 Pa rear load rating
- Warranty: 12-year product, 30-year performance — max 1% first-year degradation, 0.40%/year after, 87.4% remaining at year 30
The JinkoSolar Tiger Neo 72HL4-(V) is a 144-cell N-type TOPCon module delivering up to 605 W per panel, aimed at projects that need maximum capacity per square metre of roof — larger homes, hotels, factories and warehouses. The specification that matters most in Phuket's climate is the −0.29%/°C temperature coefficient, meaningfully better than older P-type modules: when panels heat up through the afternoon, output falls less. Jinko backs it with a 30-year performance warranty.
What is the Tiger Neo 72HL4-(V), and how does N-type TOPCon differ?
Tiger Neo is JinkoSolar's N-type family built on TOPCon cells — Tunnel Oxide Passivated Contact. The difference from the P-type PERC modules that dominated earlier lies in cell structure, which reduces losses at the contact between cell and electrode. The result is higher efficiency, a better temperature coefficient and slower degradation. Three numbers matter in practice. First, module efficiency of 23.42% tells you how many watts you get per square metre — higher efficiency means less roof area for the same system size. Second, the −0.29%/°C temperature coefficient tells you how much output drops for every degree the module runs above the 25°C test standard; in Phuket, rooftop modules can reach 60–65°C at midday, so this figure has real consequences. Third, the 30-year performance warranty still guarantees 87.4% output in its final year — longer than the 25 years typical of P-type modules.
Highlights from the datasheet
- 605 W per module: fewer panels, fewer mounting clamps and fewer connections for the same system size — less labour and fewer failure points
- 23.42% efficiency: more capacity from the same roof, valuable where usable area is the binding constraint
- −0.29%/°C temperature coefficient: less output loss as modules heat up, which matters year-round in a tropical climate
- 0 ~ +3% power tolerance: modules are never weaker than the label, only equal or stronger
- 30-year performance warranty: max 1% first-year degradation, 0.40% per year thereafter, 87.4% at year 30
- 5400 Pa front load rating: handles Andaman monsoon wind loading when mounted to the manufacturer's specification
- IP68 junction box, anodised aluminium frame: appropriate for the humid, salt-laden air of an island installation
Key specifications (JKM580-605N-72HL4-(V))
| Specification | Datasheet value |
|---|---|
| Maximum Power (Pmax) | 580–605 Wp (รุ่นย่อย 580 / 585 / 590 / 595 / 600 / 605 W) ค่าความคลาดเคลื่อนกำลัง 0 ~ +3 % |
| Module Efficiency (STC) | 22.45–23.42 % (รุ่น 605 W = 23.42 %) |
| Cell Type | N-type Mono-crystalline TOPCon (Tunnel Oxide Passivating Contacts) |
| Number of Cells | 144 เซลล์ (72×2 ครึ่งเซลล์) |
| Voltage at Maximum Power (Vmp) | 44.23 V (รุ่น 605 W) |
| Current at Maximum Power (Imp) | 13.68 A (รุ่น 605 W) |
| Open-circuit Voltage (Voc) | 53.11 V (รุ่น 605 W) |
| Short-circuit Current (Isc) | 14.31 A (รุ่น 605 W) |
| Temperature Coefficients | Pmax −0.29 %/°C, Voc −0.25 %/°C, Isc 0.045 %/°C |
| Dimensions (L × W × H) | 2278 × 1134 × 30 mm |
| Weight | 27.0 kg |
| Maximum Static Load (Front / Rear) | ด้านหน้า 5400 Pa / ด้านหลัง 2400 Pa |
| Maximum System Voltage / Maximum Series Fuse Rating | 1000/1500 VDC (IEC) / 25 A |
| Operating Temperature & Construction | −40 °C ~ +70 °C · กระจกหน้า 3.2 mm เคลือบกันสะท้อน ส่งผ่านแสงสูง เหล็กต่ำ นิรภัย · เฟรมอะลูมิเนียมอโนไดซ์ · กล่องต่อสาย IP68 · Protection Class II · IEC Fire Type C |
| Product Warranty | 12 ปี |
| Linear Power Warranty / Degradation | 30 ปี — เสื่อมปีแรกไม่เกิน 1 % ปีถัดไป 0.40 % ต่อปี คงเหลือ 87.4 % เมื่อสิ้นปีที่ 30 |
Note: every figure above comes straight from the Jinko Solar Co., Ltd. (จดทะเบียนตลาดหลักทรัพย์เซี่ยงไฮ้ STAR Board รหัส 688223) — บริษัทแม่คือ JinkoSolar Holding Co., Ltd. จดทะเบียน NYSE รหัส JKS ตั้งแต่ปี 2010 datasheet. Actual system design (strings per MPPT, cable sizing, breakers) must be calculated for each site.
Why this model suits Phuket
- Modules run hot almost year-round: the better temperature coefficient preserves afternoon output on bright days, and the difference accumulates into real kWh over a year
- Constrained urban roofs: high per-panel wattage delivers the target system size in less area — important on shophouses and commercial buildings
- Monsoon wind and heavy rain: 5400 Pa front loading and an IP68 junction box suit Andaman conditions when mounting spacing follows the manual
- Salt air: the anodised aluminium frame resists corrosion better than plain metal, and on coastal sites we specify stainless fixings at every point as well
Who it suits
- Large homes and pool villas: systems of 10 kWp and above with a manageable panel count
- Hotels and resorts: wide roofs where capacity per square metre justifies the structural work
- Factories and warehouses: long metal-sheet roofs that accommodate large-format modules easily
- Projects controlling labour and clamp counts: 605 W panels cut the piece count against 450–500 W modules
- Owners taking a 20–30 year view: the 30-year performance warranty underwrites long-term returns
Summary
The JinkoSolar Tiger Neo 72HL4-(V) 605W suits Phuket projects that need high capacity per square metre and good heat tolerance: 23.42% efficiency, a −0.29%/°C temperature coefficient and a 30-year performance warranty make it a fit for large homes, hotels and industrial roofs. For ordinary house roofs split into smaller planes, the shorter 54HL4R-(V) 460W often lays out more efficiently.
See other models from this brand on the Jinko Solar overview, or browse all the equipment we install.
Download the datasheet (PDF) — full manufacturer specification sheet